Terminal RS-232C is a test, analysis and simulation tool for serial communication protocols(RS232, RS485/422 and others).It allows you to monitor the communication between two serial devices or to test the serial communication of a single device.

It can send out user-defined sequences according to the protocol used and
it can react to incoming sequences. This makes it possible to simulate the
behavior of a serial communication device, which is particularly useful for
generating test conditions that are hard to reproduce with the original device
including problem conditions.

This program will work with the COM communication ports provided by your operating system. Physically, these ports will be RS232 SUB D9 interfaces in most cases.

However, it is also possible to use this program for other communication standards such as RS422 and RS485, which have a different electrical design to RS232 but follow the RS232 communication mechanism. If you're developing systems which provide a CAN bus interface, then this may also be used to test the CAN interface, you will just need a CAN to RS232 converter for your PC.

Terminal RS-232C is easy to use and runs on almost any standard PC using
MS Windows 95/98/NT 4/2000/XP operating system.

• KeyInjector 2.
  KeyInjector serial port barcode wedge software enables serial barcode scanners to communicate with your Windows applications. Plexis KeyInjector will accept data from a serial...

• Plexis Barcode Wedge 2.
  Plexis Barcode Wedge serial port barcode wedge software enables barcode scanners to communicate with your Windows applications

• Advanced Serial Data Logger 2.0.4.
  Digital technologies evolve with blazing speed. Computers are becoming entertainment centers of our homes. Tireless machines replace often erroneous human beings at business-critical automation tasks. Various devices are being attached to PCs in...

• RS232 Data Logger 2.7
  RS232 Data Logger by Eltima Software is an Open Source application which allows you to redirect all communication data from RS232 compliant serial port device into a text file for further analysis

• Terminal RS-232C 1.5
  The program is used for debugging microprocessor systems or hardware-program complexes through interface RS-232C

• Docklight RS232 Terminal - RS232 Monitor 1.6
  Docklight is a test, analysis and simulation tool for serial communication protocols (RS232, RS485/422 and others)