See the standard RMON statistics for your whole network segment.

? Traffic matrix and chart (shows traffic
between stations/hosts)
? Host table and chart (shows traffic by
host)
? TCP/UDP port table and chart (shows
activity by port)
Distribution
? MAC layer octet distribution
? TCP/UDP octet distribution
? Protocol octet distribution
? Packet size distribution
? Utilization Rates
? Total octet rate
? Broadcast octet rate
? Multicast octet rate
? Unicast octet rate
? ICMP octet rate
? TCP SYNC octet rate
? 64 bytes packet rate
? 65-127 bytes packet rate
? 128-255 bytes packet rate
? 256-511 bytes packet rate
? 512-1023 bytes packet rate
? 1024-1518 bytes packet rate
? Error rate
? CRC error packet rate
? Collision packet rate
? Underrun packet rate
? Alignment packet rate
? Overrun packet rate
? FTP octet rate
? Telnet octet rate
? SMTP/POP/IMAP octet rate
? HTTP(S) octet rate
? NNTP octet rate
? NetBIOS octet rate
? SNMP octet rate
? Captures packets from local and
remote segments


PROTOCOLS
See which protocols are in use on you network.

APPLICATIONS
See which applications are in use on your network.

HOSTS
See the traffic for each host on your network and which ones are the most active.

CONVERSATIONS
See the traffic among the hosts on your network, and which ones are the most active.

HISTORY
See trends as traffic is captured in real time and and charted on a time line
REPORTS
a. which device generate most trafic
b. which application generate most trafic
c. which devices generate most trafic (conversetaion monitor)
d. most used protocol
e. which device lock network
f. which device generate erronious trafic
g. The most used 5/10/15/N application and used ones
h. 5/10/15/N MAC addresses and IPs which generate the most packet on network.
i. 5/10/15/N MAC addresses and IPs which used bandwith and erroreous ones

• Netjini 1.0
  See the standard RMON statistics for your whole network segment. ? Traffic matrix and chart (shows traffic between stations/hosts) ? Host table and chart (shows traffic...

• WanSpy 1.6
  Overview of WanSpy WanSpy is intended to give Network Administrator a visual view of how his Expensive Wan Bandwidth is getting utilized

• SwitchCop V1.0
  SwitchCop shows: General Information about Switch: Information like Switch name, its up time, mac address, port count, contact person name etc. Basic Bridging Information: It includes generic info about every port that is associated with this...

• Interface Traffic Indicator 1.5.0.3
  Interface Traffic Indicator, inftraf

• Quick Ping Monitor 3.09
  Quick Ping Monitor is a powerful graphic ip monitor tool. It is able to monitor the states of thousands of IP equipments simultaneously and send message when states of some equipments change ! it could also adopt necessary steps to deal with troubles. Quick Ping Monitor is very useful for network administrators, server administrators, webmasters...

• Ping Plus 1.06
  3DSNMP's Ping Plus utility exceeds the standard visual graphics and the binding data of most pinging utilities out there