The GSA Object Counter program was developed for the automatic recognition and classification of two-dimensional objects. The tool consists of two analysis methods for object recognition, which are independent of each other.
Method number one uses a neural network. Artificial intelligence (AI) is used to try to assign new objects to trained object groups. This procedure was tested in a practical approach with different objects (objects, numbers) and produced very good results. The second object recognition method is a color-based analysis method. Also this method has proven itself in practice (detection of different PET bottles). The method, using a neural network, is suitable for objects that differ from one another in terms of their object shape. The color analysis method is to be preferred if objects have the same shape but differ in their coloring.

Other program functions:

- Video interface for image capture and object recognition
- Configurable trigger mechanism with time delay (avoids motion blur)
- Timer-based image monitoring
- Monitoring of defined image areas
- Adjustable image filters (Gaussian filter, edge selection, B / W transformation, object centering)
- Configurable result output

• Cut and fill volume in AutoCAD 1.4
  Cut and fill volume is an add-on for AutoCAD or BricsCAD, with new commands for scale modification for LINETYPE and HATCH, registration of mileage in BLOCKs, modification of longitudinal profiles, DWG to custom Hatch...

• Drilled columns reinforcement 2.0
  It automatically generates the construction drawings and the reinforcement extract for the 3D reinforcement of the drilled columns, foundation plate, corbel and/or the tympanum.

• GCULVERT Cast in place box culvert 1.2
  It automatically generates the construction drawings of the cast in place box or pipe culverts. The culvert consists of one or more rectangular frame pieces or pipes, 2 wings or a wing and a fall chamber. Rectangular pieces can be placed in steps to reduce the slope of the drain. The wings and the fall chamber can be...

• GWB Get wooden beams 1.3
  An add-on for AUTOCAD wich identifies wooden beams from 3D DWG drawings of wooden houses. The result of the program is a drawing with the identified parts (numbered and dimensioned) and a file of quantities that can be loaded into EXCEL.

• Mesh Unfolder 3.01
  Mesh Unfolder is a specialised engineering 3D CAD system for importing and unfolding sheet mesh designs for fabrication or manufacture. Surface mesh geometry is imported from DXF, STL, OBJ or WAV files created in a CAD system such as Autocad, then...

• Bandicam Screen Recorder 7.1.0.2151
  Bandicam is the best Game, Video, and Screen recording software. It is high quality, and allows you to upload the recorded file to YouTube without converting it because the recorded file size is 20% to 95% smaller than files created by other software