LITIO is a sheet metal program that calculates flat (unfolded) sheet development of ducts, rectangle to round transitions, cylinders, cones, pipe intersections, connections, bifurcations, elbows, etc.
For HVAC, hoppers, cyclones, dust extraction, ducts, conveying systems, silos, piping, etc.
To draw your sheet metal developments directly in AutoCAD R2000 and later (no need of DXF convertions).
Steps of use:
First select the 3D surface you want to unfold.
(You can select: either inside, outside, or mid cross sectional dimensions and/or height specifications; to draw or not the 3D surface, and the unfolded sheet as a mesh [to help you when bending the sheet] or as 2D contour [to ease cutting]; the precision of the calculation of the developments).
Metric Units/Imperial units: the program automatically sets the units according to the units used
in the current drawing session.
After finishing the input of parameters, the program draws the 3D object and the respective
development.
Afterwards, you can use the 2D developments for CAM cutting (plasma, laser, etc.) or manual
cutting, by plotting them 1 to 1 (1 d.u. = 1 mm or 1 d.u. = 1 inch), and using them to mark
sheet and cut.

• Sheet Lightning 5.x Site License 5.
  SITE LICENSE - for unlimited use of Sheet Lightning 5.x at a single site, including all commercial and educational sites. Revcad software must also be notified by the licensee of...

• Sheet Lightning Demo 5.
  Sheet Lightning is a specialised engineering 2D/3D CAD System for creating and unfolding sheet metal designs for fabrication or manufacture

• Sheet Lightning 5.0 5.
  Sheet Lightning is a specialised 2D/3D CAD System for creating and unfolding sheet metal designs for fabrication or manufacture. It handles everything from simple cylinders, cones, rectangular ducts and ovals, to adapters, adapting any of these...

• Sheet Lightning Demo 5.2
  Sheet Lightning is a specialised engineering 2D/3D CAD System for creating and unfolding sheet metal designs for fabrication or manufacture

• Psychrometric + Duct Calculator 4.0
  A convenient, precise and powerful tool for HVAC&R engineers. This psychrometric chart use ASHRAE equations at normal temperature and pressure region and is perfectly consistent with all ASHRAE charts of No.1~7(SI Units) and No.1~5(IP Units). Full functional trial, free upgrade. Both Metric(SI) and English(IP) units support. Save and load...

• Sheet Lightning Demo 5.2.4
  Sheet Lightning is a specialised engineering 2D/3D CAD System for creating and unfolding sheet metal designs for fabrication or manufacture

• Sheet Lightning 6.10
  Sheet Lightning is a specialised engineering 2D/3D CAD System for creating and unfolding sheet metal designs for fabrication or manufacture

• Sheet Lightning 3.60
  Sheet Lightning is a specialised engineering 2D/3D CAD System for creating and unfolding sheet metal designs for fabrication or manufacture